Desktop Synths

Ge0sync Desktops

Ge0sync Desktop synths are semi-modular stand alone synthesisers that combine the sound and modulation sources from the eurorack series into a handy stand alone desktop format for those not wanting a full Eurorack solution but like the modular patching capability of Semi-modular synths. All desktops feature a pre-hardwired signal path allowing instant playability with a typical fixed architecture signal path (patch).


The TB-Valhalla is an homage to the Roland TB-303 with some added extras.

The synth is a dual VCO (TB-O) mono synth design, with additional noise source (GS1-NR). The three audio signals can be pre mixed before entering the classic bubbly 303 style filter based (TB-EFA).

For modulation duties a Ring Modulator (GS1-NR) and LFO (GS1-L) are provided.

The unit also contains a simple buffered audio mixer and two independent multiples.

Self contained and powered by a 12V AC power brick. Available as a pre-built unit (built to order) or as a DIY partial kit.

GS-Valkyrie

The GS-Valkyrie is a slightly larger format desktop stand alone synth built from the various modules available in the GS Series 1 range.

A dual VCO (GS1-O) mono synth design with added noise source (GS1-NR) the GS-Valkyrie brings that classic CEM3340 dual oscillator flavour as used in so many early 80’s monosynths.

The mixed audio outputs enter the VCF (GS1-F) which has its own dedicated envelope (GS1-E) before being sent on to the VCA (GS1-A), again with its own dedicated envelope.

For modulation, the Ring Modulator, Gate Delay (GS1-U) and LFO (GS1-L) can be used in any of the modulation inputs – VCO, VCF and VCA.

Self contained and power by a 12V AC power brick. Available as a pre-built unit (built to order) or as a DIY partial kit.

DIY Synth Build Service

Create a website or blog at WordPress.com